Zhuhai Easson Measurement Technology Ltd.
Easson Measurement Technology Ltd. Always Committed to Quality, Technology & Innovation
Add to Cart
Product Introduction
Typical applications of manual machine tools such as milling or lathes, resolution 10 μm or 5 μm is sufficient to meet the application requirements. The linear scale of the GS10 and VS10 series provide such a resolution with an accuracy class of ± 10 μm within 1meter travel range.
Ultra Low Temperature Rise Transformer
Easson all Digital readout system's power supply use a voltage switch linear power transformer and power filter, this can help our products pass by the noice immunity and the EMC.
To reduce the total heat generation inside the ES DRO in order to obtain long working life. An ultra low temperature rise transformer that construct with very high permeability icron core is used, which effectively bring temperature rise to only about 5℃.
EMC Testing equipment
To Make sure all Easson DRO products can be pass the standard EMC standard specification, we have a complete set of EMC test esd immunity tester.
Technical Specification
| Type | ES-14 | ||
| Axis number | 3 Axis | ||
| Axis Display | 0.1μm, 0.5μm, 1μm, 5μm | ||
| Signal Output | TTL | ||
| Operation Voltage | AC110 V - 220 V / 50Hz - 60Hz | ||
| Gross Weight (kg) | 3.5 | ||
| Input frequency | 2 MB Hz | ||
| Operation Keyboard | Light touch buttons | ||
| Operating temperature | 0℃ - 45℃ | ||
| Storage temperature | -40℃ - 55℃ | ||
| Relative humidity | ≤ 95% | ||
| Inputs | 3 optical linear scale | ||
| EMC Standard | IEC61000-4-2 / GB / T 17799-2 IEC61000-4-4 / GB / T 17799-4 IEC61000-4-5 / GB / T 17799-5 | ||
Basic parameter is included as below:
| Centering (1/2) |
| Metric / inches Display (mm / Inch) |
| Absolute / incremental (ABS / INC) |
| Power off Memory (30 subdatum) |
| 199 subdatum |
| Reference Memory (REF) |
| Clear Zero |
| Pitch Circle Diameter (PCD) |
| Line Hole Positioning (LHOLE) |
| Simple “R” Function |
| Inclined Machining |
| Linear Error Compensation |
| Non Linear Error Compensation |
| INCL Function |
| Axis Speed Display |
ES series DRO advanced Functions: Non-linear error compensation
Advanced functions for Milling machine
Connector interface
| PIN | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| TTL Signal | --- | 0V | --- | GND | --- | A | 5V | B | R |
| Cable | --- | Orange | --- | Ground | --- | Yellow |
FAQs
1. Q: Did you accept OEM customized service?
A: Of course, we can provide not only typical products but also customized products according to customer's request based on the order quantity.
2. Q: What is your company mainly produce?
A: We are mainly manufacture Vision Measurement Systems, Optical Profile Projector, Digital Readout System(Counter), Linear encoder, CNC Linear Scale.
3. Q: Delivery time
A: Sea freight order is 30-45 days after receive the order comfirmation, small quantity for air freight is available to ship anytime.
4. Q: Payment term
A: 100% T/T payment, for others payment terms, welcome to contact us.